CL300 Cable Locating Kit

Quick, Easy and more Accurate locating = $avings in time and cost!

Feautures

CL-300: Cable Locating Kit

Quick, Easy and more Accurate locating = $avings in time and cost!

The CL-300 cable locating kit consists of a portable, holstered pipe & cable locator with an industry accepted 33 kHz transmitted frequency and with 512 Hz detection capability. Add a 512 Hz sonde or traceable duct rodder, and the CL-300 quickly becomes the perfect tool for empty duct work locating. This instrument is capable of detecting all electrical, telecommunications and wire circuits—whether direct buried cables or those within conduits—using direct connect or close induction methods. To assist with a variety of locate work and congestion, the locator features Auto & Manual adjustments for both transmitter power and receiver sensitivity.

Applications

Locate and trace the path for all electrical and telecommunication cables along with buried wire for pumps, irrigation or traffic control systems. The CL-300 will also detect tracer wire buried alongside water/sewer or gas pipelines. In SONDE mode, this instrument will detect and pinpoint any device that transmits at a 512 Hz frequency, such as an inspection camera, boring equipment or sonde. The CL-300 is a great kit for utilities, construction companies and home service contractors needing to mark buried utilities for damage prevention, excavation and facilities maintenance.

CL-300 Kit Includes

  • XTpc-33 Pipe & Cable Locator
  • Heavy Duty Conductive Clip
  • 5″ Inductive Signal Clamp
  • 512 Hz Sonde Capable
  • Padded Carrying Case
  • 3-year Warranty

 

Specifications

Receiver Specifications

Operating Frequency:33kHz; plus 50Hz/60Hz passive detection (factory selectable)
Battery:One 9V battery
Battery Life:18 hours (intermittent use)
Audio Output:10 – 30000 Hz determine by signal strength (line rtn) 0 – 70 db SPL (Sound Pressure Level), volume controlled
Weight (incl. batteries):Under 2.8 lbs
Operating Temp.:-4°F to 140°F (-20°C to 70°C)
Overall Dimensions:Closed: 17.5" x 3" x 8.5" (44 cm x 7.6 cm x 21.5 cm)
Extended: 27.7" x 3" x 8.5" (70 cm x 7.6 cm x 21.5 cm)
Max. Depth Capability:Approximately 19’ (5.8 m)

Transmitter Specifications

Operating Frequency:33 kHz
Output Power:33 kHz - 1.8 W maximum (conductive mode)
Battery Type:Rechargeable NiMH pack (7.2V)
Battery Life:8 hours (intermittent use)
Charging:Smart charger powered by AC supply or vehicle supply
Outputs/Inputs:Circular "smart" connector to:

  1. Inductive antenna

  2. Inductive clamp

  3. Conductive clips

  4. Battery charger

Weight (incl. batteries):Under 1.5 lbs
Operating Temp:-4°F to 140°F (-20°C to 70°C)
Standard Equipment

CL300 Standard Equipment

The CL300 comes with an extensive package of standard locator equipment including:

  • Receiver & Transmitter
  • Holster (p/n: PC10012)
  • Conductive Clip Assembly (p/n: PC70000) which includes Standard Conductive Clips — C91010 (Red) and C91011 (Black)
  • Padded Carrying Case (p/n: 600023)
  • Ground Stake (p/n: 208263)
  • Auto Adapter for Transmitter
  • Main Charging System (Coverter, Power Supply & Cord) for Transmitter
  • 5 inch Inductive Signal Clamp (p/n PC60001)
  • Small Heavy Duty Conductive Clip ( p/n TM70002-1)
Accessories

CL300 Accessories

The following accessories are available to meet every locating need.

  • Inductive Antenna (p/n PC20033)
  • Standard Headset (p/n: XT40000)
  • 2″ Inductive Signal Clamp (p/n: PC60000)
  • 5″ Inductive Signal Clamp (p/n: PC60001)
  • 7″ Inductive Signal Clamp (p/n: PC60002)
  • Large Heavy Duty Clips – p/n: TM70001
  • Small Heavy Duty Clips – p/n: TM70002
  • Carry-All Bag (p/n: PC40000)
  • Belt Accessory Pouch & Nylon Belt (p/n: PC30000)
  • 512 Hz small sonde (p/n TM50911)
  • 512 Hz Sonde (p/n TM50910)